EasyManua.ls Logo

Surge master SM3000SU - INTRODUCTION; Generator Purpose; Safety and Operation Manual; Neutral Bonded to Frame

Surge master SM3000SU
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
1 INTRODUCTION
SM2500CH
SM3000SU
SM5000CH &
SM5000 GFI
SM3000CH
SM3000 GFI
Congratulations on your choice of the SurgeMaster Generator. This equipment has been designed
and manufactured to meet the needs of a home owner, business operator or industry that needs electric
power during power outage, at a remote location or any time remote power is needed.
Safe, efcient and trouble free operation of your SurgeMaster Generator requires that you and
anyone else who will be using or maintaining the generator, review this SurgeMaster Operators
manual and read and understand the Safety, Operation, Maintenance and Trouble Shooting infor-
mation contained within this Manual.
All SurgeMaster generators are CSA certied and are "neutral bonded to frame" this is a safety feature
that means that the neutral line of the electrical circuit has been bonded to the frame of the generator. The
purpose is to make fulll advantage of the overcurrent protection device to prevent shocks & electrocu-
tion due to a short circuit from a defective cord or device. In effect this will cause the current from a short
circuit to travel back to the generator and activate the breaker, instead of through a person to ground
The
SurgeMaster Emergency Power Series generator
is designed to be a
reliable source of continuous power for the home owner, or
recreational use.
Utilizing robust pull start gas powered engines to provide a steady and
dependable source of power,
in case of power outage,
or when the need
arises. The emergency power series is intended to be connected directly to
the appliance/equipment requiring electrical power. It is not recommended
to connect these generators to a home electrical system without appropriate equipment and a qualied
electrician to make the connections.
The
SurgeMaster Contractor Ready Series generator
are designed with
the contractor in mind. Equipped with GFCI protected outlets, these genera-
tors are a safe and dependable source of continuous power on the job site.
Small and portable,
the pull start gas powered engines produce a steady
and dependable source of power,
for all your power tools.
As well having
the neutral conductor bonded to the frame, Contractor Ready generators
feature GFCI outlet protection, an OSHA requirement when using portable
electrical equipment on job sites.
From home owners, recreational use campers, hunters, snowmobilers, to jobsite contractors, decks,
docks, & fence builders, rugged roll-cage frame to stand-up to jobsite demands, the SurgeMaster
line-up of generators will get you up and running.
Optional Kits: available are the WK210 & WK214 Wheel Kits, which make it a one person job to easily
move your generator into position.
Use the Table of Contents or Index as a guide to locate required information. Keep this manual handy for
frequent reference and to pass on to new operators or owners. Call your Wallenstein dealer or the Distribu-
tor if you need assistance, information or additional copies of the manuals.
OPERATOR ORIENTATION - The directions left, right, front and rear, as mentioned throughout this
manual, are determined when facing the control panel

Related product manuals