SURUGA SEIKI H410 Series User Manual

SafetyCautions
ii
Handling of this Product
●
Before starting or operating this product, please check the functions and performance of this product
are operating correctly.
●
If this product is not working properly, take suf¿cient safety measures to prevent various damages, and
contact our sales of¿ce.
●
:hen this product is used out of standards indicated in the speci¿cations or in a modi¿ed state, be
cautious that we cannot cover the functions and performance under the warranty.
●
When this product is used by combining with other devices, please consider carefully, because its
functions and performance may not be satis¿ed due to the use condition and environment.
●
Do not use this product to protect human bodies and a part of human bodies.
●
This product is not designed to be used in areas where explosion proof is necessary. Do not use this
product in areas where explosion proof is necessary.
●
Including peripheral devices, do not apply rapid temperature changes to each device. Condensation
may cause the device to fail.
●
IPU (Image Processing Unit) to connect to this product should be placed vertically. Do not place it side
way.
●
Do not wipe this product with wet cloth, benzine, and thinner. It may cause discolorization and
deformation of this product. When heavy soil is present, soak a cloth to a diluted neutral detergent,
wipe it by squeezing off the detergent well, and wipe it dry with a soft cloth.
Caution on Installation Environment
Caution
Do not install this product in the following places in order to use this product normally or
safely.
-
Highly humid place, dusty place, and place with bad ventilation.
-
Places where temperature gets high such as by direct sunlight.
-
1ear Àammable locations.
-
Places where there are corrosive gases and inÀammable gases.
-
Places where vibration and shock are directly applied.
-
Places where splash from water, oil, and drugs gets on this product.
-
Places where static electricity is likely to be generated.
-
Tilted and unstable places.

Measures Against Noise
Caution
When installing this product near noise sources such as a power source and high-voltage
lines, the noise may cause malfunction and damage. Take measures such as use of noise
¿lters, a separate piping of various cords, and attaching an insulation to the controller and
measurement parts.

SURUGA SEIKI H410 Series Specifications

General

Brand	SURUGA SEIKI
Model	H410 Series
Category	Measuring Instruments
Language	English