SURUGA SEIKI H410 Series User Manual

SafetyCautions
iii

Effects of Ambient Temperature
Caution
Changes of ambient temperature may cause measurement errors. Always try to make it
constant. The use environment temperature of this product is 0 to 40°C, and the performance
guarantee temperature is 23°C ± 5°C.

Use of Ambient Lighting
Caution
Do not use this product near a lighting facility where ON/OFF in a high frequency is repeated.
When it cannot be avoided, install a shielding plate to minimize its effect.
Caution When Using
Warning
●
Usewithacorrectpowersourcevoltage.Itmaycausefire,electricshock,anddamage.
●
Donotdisassemble/modifytheunit.Itmaycausefireandelectricshock.
Caution
●
Whenattaching/detachingthecord,alwaysturnthepowersourceOFFofthemainbodyand
devicesconnectedtothemainbody.Itmaycausedamage.
●
DonotturnthepowersourceOFFwhilesettingtheitems.Apartorallofsettingdatamaybelost.
●
Donotblocktheventilationholeofthemainbody.Insidetemperatureincreasesanditmayresult
indamage.

Effects of Dirt and Dust
Caution
In the following cases, measurement errors may be generated due to the effect of dirt, dust, or
water and oil.
-
Adhesion to the cover glass: Blow a clean air to remove the dirt on the cover glass. If it is
extremely dirty, wipe off with a soft cloth soaked in alcohol.
-
Adhesion to a measurement target surface: Blow with a clean air, and wipe off the dirt.
-
Penetration from Àoating to the optical axis region and by splash: Take measures by installing a
protection cover and air purge.

Measured Target
When the shape of measured target and surface state are different, measurement errors may be gener-
ated. In the case, use an existing target object, and correct with the angle correction function.

SURUGA SEIKI H410 Series Specifications

General

Brand	SURUGA SEIKI
Model	H410 Series
Category	Measuring Instruments
Language	English