SafetyCautions
iv
Effects of Vibration
If a measurement target object is vibrating, the measured values may vary. In the case, a more precise
measurement is possible by increasing the number of measurement values to calculate an average.
Effects of Air Fluctuation
A slow air Àuctuation may cause measured values to vary.
In such a case, the following measure is effective.
-
Cover the measurement part with a wind-proof cover.
Measures for Errors
Warning
In the next case, promptly turn the power source OFF. If this product is kept using in an
abnormal state, it may cause damage.
Please contact our sales agency for repair.
-
When water and foreign objects enter inside.
-
This product is dropped and the case is damaged.
-
Smoke comes from the controller and it smells strange.
CE Marking
This product comply with CE marking for the following complying standards and conditions. When this
product is used in EU countries, keep the following conditions.
-
EMI: EN61326-1 Class-A
-
EMS: EN61326-1
* All cable lengths for input and output containing the power source cable to connect IPU are less than 30 m.
To Next Page
Loading...
Need help?
General