Step 2
2.1 Install the terminal on
the backplane
2.2 Install the circuit breaker
on the backplane.
2.3 Install the power supply
on the backplane
Step 3
3.1 Install the backplane in the totem
Fix the screws of the
backplane as well as the
NANOPAK by adjusting the
inclination
Step 4
12
SURVISION can carry out this operation.
See 2.1.3
3.2 Connect a second
earth cable to the door.
3.3 Secure the cable entry
in the strong current so that
it cannot detach from the
terminal.
Connect to earth
To Next Page
Loading...
