Menu
In MENU you can change values, change the general settings and
units, or view logs stored in the logbook. To enter MENU, keep the
middle right [Mode] button pressed while in the TIME, ALTI & BARO
or COMPASS mode. The segments in the outer part of the display
indicate your transition time. Exit MENU by pressing the upper left
[Start Stop] button. Whenever an exit option is available in MENU,
this is indicated with an "X" on the screen next to the [Start Stop]
button. Get familiar with entering and exiting MENU!
Backlight
You can activate the backlight in any mode by pressing the lower
right [- Light] button. The backlight turns off automatically after 5
seconds. If you want to see the backlight when you are in
MENU
,
you need to activate it in the TIME, ALTI & BARO or COMPASS
11
To Next Page
Loading...
