Suzuki C10 - Dual Engine Configuration; Initial Power-Up

25
Dual Engine Conguration
This section shows you how to set-up a dual-engine
conguration using three (3) C10 Color Displays,
two uid level sensors, two engine interfaces, and
one GPS.
This is a typical dual-engine conguration using
three C10 Color Displays. You may choose to
set-up your vessel differently by adding or reducing
the number of accessories.
Initial Power-Up
NOTE:
The C10 should be connected to a dual cable or
Suzuki Precision Control (SPC) motor, and then be
powered up. It is now ready for conguration.
Once the C10 Color Display is turned ON, the
Suzuki “S” logo appears. The C10 then takes 25 –
30 seconds to power-up to the rst screen.
Select a Language
The rst screen to appear is the Select Language
screen — use the arrow buttons to select the
proper language, then press Enter.
Set the Time and Date
NOTE:
With a GPS installed, the local time offset is
automatically populated.