2-15
CLOCK AND THERMOMETER D
Time or ambient air temperature is
shown when the ignition switch is in
the “ON” position. Press and hold the
left handlebar METER SELECT
switch to change display between
clock and thermometer with the igni-
tion switch on.
Clock
Press and hold the left handlebar
METER SELECT switch and ADJUST
button 1 simultaneously for 2 sec-
onds until the clock display blinks
when adjusting clock. Push the left
handlebar METER SELECT switch to
adjust the hour display. Push the
ADJUST button 1 to adjust the
minute display. Press and hold the left
handlebar METER SELECT switch
and ADJUST button 1 simulta-
neously for 2 seconds to return to the
clock mode.
NOTE:
• When the switch or button is
pressed and held, display will
increase continuously.
• The clock can be adjusted when
the ignition switch is in the “ON”
position.
• This clock is powered by the bat-
tery of the motorcycle. If your
motorcycle is to be left unused
more than two months, remove
the battery from the motorcycle.
Thermometer
The thermometer shows the ambient
air temperature.
The thermometer display will be
changed between °C and °F accord-
ing to the fuel economy setting when
the ADJUST button 1 is pressed and
held for 2 seconds.
•MPG US
• MPG IMP
NOTE:
• The thermometer will not indicate
the actual ambient air temperature
when riding at low speed or when
stopped.
• The thermometer displays “L”
when the ambient air temperature
is below –10°C (14°F). The ther-
mometer displays “HI” when the
ambient air temperature is above
50°C (122°F).
AI
To Next Page
Loading...
