2-16
ODOMETER/TRIP METER
/FUEL ECONOMY METER
/INSTRUMENT PANEL LIGHT
BRIGHTNESS E
The display has 6 functions; odome-
ter, two trip meters, fuel economy
meters and instrument panel light
brightness. When the ignition switch
is turned to the “ON” position, the test
pattern shown below is displayed for 2
seconds. The display is memorized
when the ignition switch is turned off
and the memorized display appears
when the ignition switch is turned on
again.
NOTE:
• Set the meter to odometer, then
press and hold the ADJUST but-
ton 1 for 2 seconds to switch
between km and mile. At this time,
speedometer will be changed
between km/h and mph.
• Select km/h or mph, as appropri-
ate, to comply with traffic regula-
tions.
• Check the km/h and mph display
after adjusting the instrument
panel display.
FI
H
GEAR
C
EF
mph
TRIP
AIR
1
2
L/100kmkm/LMPG USIMP
km/h
˚C
ADJUST
mphkm/h
To Next Page
Loading...
