2-17
To change the display, push the left
handlebar METER SELECT switch.
The display changes in the order
below.
Odometer
The odometer registers the total dis-
tance that the motorcycle has been
ridden. The odometer ranges from 0
to 999999.
NOTE: The odometer display locks at
999999 when the total distance
exceeds 999999.
Trip meters
The two trip meters are resettable
odometers. They can register two
kinds of distances at the same time.
For instance, trip meter 1 can register
the trip distance and trip meter 2 can
register the distance between fuel
stops.
To reset a meter to zero, push the
ADJUST button 1 for 2 seconds
while the display indicates the trip
meter 1, or 2, you want to reset.
When you reset the trip meter 1 or 2,
the fuel economy meter will also be
reset.
NOTE: When the trip meter exceeds
9999.9, the trip meter will return to 0.0
and start counting again.
TRIP
1
TRIP
1
TRIP
2
TRIP
2
Odometer
Trip meter 1
Trip meter 1 fuel economy
Trip meter 2
Trip meter 2 fuel economy
Instrument panel light brightness
WARNING
Changing the display while riding
can be hazardous. Removing a
hand from the handlebars can
reduce your ability to control the
motorcycle.
Never change the display while
riding. Keep both hands on the
handlebars.
To Next Page
Loading...
