2-29
FRONT SUSPENSION
Spring Pre-load Adjustment
To change the spring pre-load, turn
the adjuster 1 clockwise or counter-
clockwise. Turning the adjuster clock-
wise will increase the spring pre-load.
Turning the adjuster counterclockwise
will decrease the spring pre-load.
There are 4 grooved lines on the side
of the adjuster 1 for reference. Posi-
tion 5 provides the minimum spring
pre-load and position 0 provides the
maximum pre-load. This motorcycle is
delivered from the factory with its
adjuster set on position 3.
A Position 0
B Position 3
C Position 5
WARNING
Unequal suspension adjustment
can cause poor handling and
instability.
Adjust the right and left front forks
to the same setting.
5
4
3
2
1
0
3
2
1
0
0
To Next Page
Loading...
