2-30
REAR SUSPENSION
Spring Pre-load Adjustment
To adjust the rear suspension spring
pre-load, turn the adjuster 1. Turning
the adjuster clockwise will stiffen the
spring pre-load and turning it counter-
clockwise will soften the spring pre-
load. Position 0 provides the softest
spring pre-load and position 5 pro-
vides the stiffest. This motorcycle is
delivered from the factory with its
adjuster set on position 2.
Rear Suspension Label
NOTE: Ask your Suzuki dealer to dis-
pose of the rear suspension unit.
H
I
G
H
L
O
W
0
1
2
3
4
5
WARNING
This unit contains high-pressure
nitrogen gas.
Mishandling can cause explosion.
• Keep away from fire and heat.
• Read owner’s manual for more
information.
To Next Page
Loading...
