6-57
REAR WHEEL REMOVAL
1. Place the motorcycle on the center
stand.
2. Remove the axle nut 1.
3. Place an accessory service stand or an
equivalent stand under the swingarm to
lift the rear wheel slightly off the ground.
4. Loosen the right and left chain adjuster
nuts 2.
CAUTION
A hot muffler can burn you.
Wait until the muffler cools before
removing the axle nut.
NOTICE
Removing the rear wheel without use of
an accessory stand can result in your
motorcycle falling over and being dam-
aged.
Do not attempt roadside removal of the
rear wheel. Only remove the rear wheel
at a properly equipped servicing facility
using an accessory service stand.
Tai Nguyen; ; 06.02.2022 22:42.
To Next Page
Loading...
