5-2
RIDING TIPS
STARTING THE ENGINE
Place the motorcycle on the center or side
stand. Shift the transmission to neutral or
squeeze the clutch lever. Insert the ignition
key into the ignition switch and turn it to the
“ON” position.
When the Engine is Cold:
1. Close the throttle grip and push the elec-
tric starter switch or depress the kick
starter lever.
2. After the engine starts, let the engine run
until the engine sufficiently warms up.
WARNING
Starting the engine improperly can be
hazardous. Starting the engine with the
center stand released can move motor-
cycle forward as soon as engine starts.
Place the motorcycle on the center stand
before starting the engine and do not
release the center stand until engine
revs at idling speed.
NOTICE
Check if the engine is under the follow-
ing conditions. If the engine is started
under the conditions other than those
mentioned, the serious engine damage
may result. If these conditions are not
indicated on the indicator, consult your
Suzuki dealer for checking.
• When the neutral indicator light comes
on, the gear position indicator should
indicate “0” (Neutral).
• When the neutral indicator light goes off,
the gear position indicator should indi-
cate either “1”, “2”, “3”, “4”, “5” or “6”.
Tai Nguyen; ; 06.02.2022 22:42.
To Next Page
Loading...
