2-8
“LOCK” Position
To lock the steering, turn the handlebar all
the way to the left. Push the key in and turn
it to the “LOCK” position and remove the
key. All electrical circuits are cut off.
WARNING
Turning the ignition switch to the
“LOCK” position while the motorcycle is
moving can be hazardous. Moving the
motorcycle while the steering is locked
can be hazardous. You could lose your
balance and fall, or you could drop the
motorcycle.
Stop the motorcycle and place it on the
center stand before locking the steering.
Never attempt to move the motorcycle
when the steering is locked.
WARNING
If the motorcycle falls down due to a slip
or collision, unexpected damage to the
motorcycle could cause the engine to
keep running, which could result in a
fire, or could result in injury from moving
parts such as the rear wheel.
If the motorcycle falls down, turn the
ignition switch off immediately. Ask your
authorized Suzuki dealer to inspect the
motorcycle for unseen damage.
Tai Nguyen; ; 06.02.2022 22:42.
To Next Page
