2-14
VOLUNTARINESS Mode setting
1. Push the ADJ button 2 to display the
Voluntariness mode.
2. Press and hold the SEL button 1 for 2
seconds. The display switches to the
engine rpm voluntariness mode.
3. Push the ADJ button 2 to switch the
lighting mode as follows: lighting mode
→ blinking mode → lighting mode. The
engine rpm indicator light 9 comes on in
the lighting mode and blinks in the blink-
ing mode.
4. After selecting the lighting mode or blink-
ing mode, push the SEL button 1 to
change preset engine rpm setting.
5. Push the ADJ button 2 to set preset
engine rpm. The engine rpm can be set
in increments of 500 r/min. The tachom-
eter indicates preset engine rpm. The
available setting range is from 3000 r/
min to 11500 r/min.
6. Push the SEL button 1 to exit the
engine rpm voluntariness mode.
NOTE: The mode selection can not be oper-
ated at the motorcycle speed of more than
10 km/h.
ADJ
SEL
RPM
N
HIGH
LOW
GEAR
km/h
F
0
1
2
3
4
5
6
7
8
9
10
11
12
13
E
TRIP
INTERVAL
OIL CHANGE
1000r/m
i
n
WARNING
Changing the display while riding can be
hazardous. Removing a hand from the
handlebars can reduce your ability to
control the motorcycle.
Never change the display while riding.
Keep both hands on the handlebars.
Tai Nguyen; ; 06.02.2022 22:42.
To Next Page
