2-17
OIL CHANGE INDICATOR C
The oil change indicator comes on to remind
you to change the engine oil. The indicator
comes on at initial 1000 km and preset inter-
vals thereafter. The preset interval is adjust-
able between 500 km and 4000 km in 500
km steps. Reset the indicator after changing
the engine oil to turn off the indicator.
To reset the oil change indicator:
1. Turn off the ignition switch.
2. Press and hold the SEL button 1 and
turn the ignition switch to the “ON” posi-
tion and hold the SEL button 1 for 3
seconds.
3. The oil change counter will reset and the
OIL CHANGE indicator blinks 3 times
and goes off.
To preset the oil change interval:
1. Set the meter to odometer, then press
and hold the ADJ button 2 for 2 sec-
onds until the INTERVAL and OIL
CHANGE indicators blink.
2. Push the SEL button 1 to decrease the
interval from 4000 km to 500 km in 500
km steps. Push the ADJ button 2 to
increase the interval from 500 km to
4000 km in 500 km steps.
3. Press and hold the SEL button 1 and
the ADJ button 2 for 2 seconds to exit
the preset.
NOTE:
• The preset interval can be adjusted after
odometer reaches 1000 km.
• Reset the indicator after initial engine oil
replacement.
• Reset the indicator after oil replacement
even if the indicator is not displayed.
• Preset interval change does not reset
the indicator.
• The preset interval is factory adjusted to
4000 km.
INTERVAL
OIL CHANGE
Tai Nguyen; ; 06.02.2022 22:42.
To Next Page
Loading...
