Suzuki GSR600 - Page 71

ENGINE 3-19
• Remove the thrust washer F.
• Remove the oil pump drive gear G from the primary driven
gear assembly H.
OIL PUMP
• Remove the snap ring 1.
• Remove the oil pump driven gear 2.
NOTE:
Do not drop the snap ring
1 into the crankcase.
 09900-06107: Snap ring priers
• Remove the pin 3 and washer 4.
• Remove the oil pump 5.
NOTE:
Do not drop the pin
3 and washer 4 into the crankcase.
GEARSHIFT SYSTEM
• Remove the snap ring 1 and washer 2.
 09900-06107: Snap ring priers