Suzuki GSR600 - Page 72

3-20 ENGINE
• Remove the gearshift shaft assembly 3 and washer 4.
NOTE:
Do not drop the washer
4 into the crankcase.
• Remove the gearshift cam plate bolt 5 and gearshift cam
plate 6.
• Remove the gearshift cam stopper 7.
STARTER IDLE GEAR
• Remove the starter idle gear cover 1.
• Remove the dowel pins and gasket.
• Remove the concaved washer 2, washer 3 and starter idle
gear No.1 4.
• Remove the shaft 5, bearing 6 and thrust washer 7.