CHASSIS 6-15
• Remove the oil seal stopper ring.
• Remove the front axle pinch bolts.
• Pull the inner tube out of the outer tube.
NOTE:
Be careful not to damage the inner tube.

The slide metals, oil seal and dust seal must be replaced
with the new ones when reassembling the front fork.
• Remove the damper rod with the front fork assembling tool.
\ 09940-30250: Front fork assembling tool.

Do not disassemble the inner rod/damper rod (cartridge).
• Drain the fork oil out of inner rod / damper rod (cartridge) by
pumping the rod.
To Next Page
Loading...
Need help?
General
