2-9
NOTE:
• High engine speed, low vehicle
speed, or heavy load can increase
engine coolant temperature.
Decrease engine speed, reduce
load and select an appropriate
transmission gear to lower the
temperature.
• Debris or mud in front of the
engine or packed between the
radiator fins can reduce cooling
ability. Remove any debris or mud
preventing air flow to the engine.
CAUTION
Operating the ATV while the FI/
engine coolant temperature indi-
cator is blinking two times a sec-
ond can damage your ATV.
Continued operation of the ATV
with high engine coolant tempera-
ture may result in engine damage
or premature wear.
If the FI/engine coolant tempera-
ture indicator blinks two times a
second, stop the engine and allow
it to cool before restarting. Refer
to the note below.
To Next Page
Loading...
