Suzuki LT-Z90 - Page 119

ENGINE 3-71
RECOIL STARTER
• Install the recoil starter
1
.
OIL FILTER
• Apply engine oil to the O-ring
1
.
• Install the O-ring
1
and oil filter
2
.

• Apply engine oil to the O-ring
3
.
• Install the O-ring
3
and spring
4
.

• Install the oil filter cap and tighten the bolts securely.
NOTE:
Face the triangle mark A on the cap downward.
B
: Bolt with clamp.
OIL STRAINER
• Install the oil strainer
1
.
• Install the oil strainer cap
2
and gasket
3
.

The removed O-ring must be replaced with a new one
to prevent oil leakage.
The removed O-ring must be replaced with a new one
to prevent oil leakage.
The removed gasket 3 must be replaced with a new
one.
PartShark.com
877-999-5686