ENGINE 3-9
ENGINE DISASSEMBLY
STARTER MOTOR
• Remove the starter motor.
SPARK PLUG
• Remove the spark plug.
\ 09930-10121: Spark plug wrench set
CYLINDER HEAD COVER
• Remove the cylinder head cover bolts, and then remove the
cylinder head cover
1
.
CYLINDER HEAD
• Remove the valve timing inspection plug
1
and generator
cover cap
2
.
• Turn the crankshaft with a box wrench to set the piston at
TDC on the compression stroke. (Rotate the generator rotor
until the line
A
on the generator rotor is center of the hole in
the generator cover.)
PartShark.com
877-999-5686
To Next Page
Loading...
