ENGINE 3-7
ENGINE REMOUNTING
Remounting the engine in the reverse order of engine removal. Pay attention to the following points:
NOTE:
* The engine mounting nuts are self-locking.
* Once the nut has been removed, it is no longer of any use. Be sure to use new nuts, and then tighten them
to the specified torque.
• Install the engine sprocket
1
with drive chain, and then install
the snap ring
2
.
"
ITEM N
·
m
kgf-m
lb-ft
A
100 10.0 72.5
B
60 6.0 43.5
C
60 6.0 43.5
D
35 3.5 25.5
PartShark.com
877-999-5686
To Next Page
Loading...
