Suzuki LT-Z90 - Page 166

5-26 CHASSIS
• Remove the cotter pin and steering shaft lower nut
1
and O-
ring.
• Remove the cotter pins and tie-rod end nuts
2
.
• Remove the tie rods.
• Remove the handlebar clamp
3
.
• Remove the steering shaft holder
4
and steering shaft
5
.
• Remove the steering shaft bush with the special tools and
suitable size wrench.
\ 09924-84521: Bearing installer set
09930-30721: Rotor remover
PartShark.com
877-999-5686