Suzuki LT-Z90 - Page 33

PERIODIC MAINTENANCE 2-17
NOTE:
Degrease the movable drive face assembly. Use non-flammable
cleaning solvent to wipe off oily or greasy matter and make its
surfaces completely dry.
• Tighten the clutch housing nut to the specified torque with the
special tool.
\ 09930-40113: Rotor holder
" Limit clutch nut: 75 N·m (7.5 kgf-m, 54.0 lb-ft)
• Tighten the fixed drive face nut to the specified torque with the
special tool.
\ 09930-40113: Rotor holder
" Fixed drive face nut: 50 N·m (5.0 kgf-m, 36.0 lb-ft)
• Rotate the fixed drive face until the drive belt is properly
seated and both the drive and driven face rotate together
smoothly and without slipping.
PartShark.com
877-999-5686