SVANTTO IAM03 - 5.2.4. Bell Set; 5.2.4.1. Bell Count; 5.2.4.2. Bell Time

Page
31
of
45
IAM03 Time Clock User Manual
Version 1.00
Figure 4-21 Set Verify Interval Times
5.2.4.Bell Set
Set the ringing time of attendance machine. After setting the ringing time, the attendance opportunity will ring at
the set time point. Select the [Bell Set] and then press the [OK] key to enter the “Bell Set” interface.
Figure 4-22 Select Bell Set Interface
5.2.4.1.Bell Count
Set the counts of ring.
Figure 4-23 Set Bell Count
5.2.4.2.Bell Time
Set the time point of the ringing, up to 24 different ringing time points can be set.