Swienty DANA api MATIC - Log; Language; Reset

28
29
ENGLISH
LOG
Press [MENU], parameters are shown on the display, press [+], LOG blinks on the display, press
[ENTER] to get into the menu.
Inthelogyoucansee,howmanykg,hoursornumberofcontainersthemachinehaslled.The
values cannot be changed.
LANGUAGE
Press [MENU], parameters are shown on the display, press [+] 2 times until LANGUAGE blinks in
the display, press [ENTER] to enter the menu.
Here you can set the language to English, German, French, Spanish or Danish by pressing [+].
All messages are shown in the chosen language. Press [ENTER] to choose a language and [Stop/
Back] to leave the menu.
RESET
In this menu you can reset the machine to factory settings for the single programs.
See these values in the table on page 30.
Reset factory settings for the chosen program:
Press [MENU], parameters are shown on the display, press [+] 3 times until RESET blinks on the
display. Press [ENTER] to choose a program and [ENTER] again to reset the chosen program. The
original values are now loaded. To leave the menu, press [STOP/BACK].