EasyManua.ls Logo

Swift Group CARRERA - Page 88

Default Icon
134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
87
FITTED EQUIPEMNT
CAUTION: The burner must only be ignited
when the door is fully open.
The rack, drip pan (tray) or the pan must be
positioned in the oven in a way that they are
not directly in contact with the flames.
If the burner flame accidentally goes out,
close the gas knob and wait a minute before
relighting.
Electronic ignition of the oven
To generate the flame, fully press down the
control knob and turn it from position 1 to
6 (Fig. 3). Simultaneously push down the
electronic ignition button.
Manual ignition of the oven
If the electronic ignition does not work, the
manual ignition is used as a substitute.
To generate the flame, fully press down the
control knob and turn it from position 1 to 6
(Fig. 3).
Simultaneously ignite the burner with a match
or gas lighter.
Once the flame has been generated, press the
knob down for a few seconds so that the flame
remains lit.
CAUTION: If the burner does not turn on:
Check that there is gas in the cylinder
If the device does not work, close the gas inlet
tap and contact your dealer.
Regulating the oven flame
To adjust the flame, turn the knob to the
desired position (Fig. 3).
Note: As soon as the oven burner flame
is turned on, it remains at the maximum
flow rate in all potions of the knob and then
automatically decreases to the minimum
flow rate when the set oven temperature is
reached.
Grill
CAUTION: The burner must only be ignited
when the door is fully open.
If the burner does not light immediately,
release the knob and repeat the operation
after 10 seconds.
Accessible parts may be hot when the grill is
used, keep children away.
When using the grill the door must be kept
open and with the heat guard fully extracted
(Fig. 4).
Never use the grill for more than 25 minutes.
The grill cannot be used as an oven.
If the burner flame accidentally goes out,
close the gas knob and wait a minute before
relighting.
Electronic ignition of the grill
To generate the flame, fully press down the
control knob and turn it from position 1 to
6 (Fig. 3). Simultaneously push down the
electronic ignition button.
CAUTION: If the burner does not turn on:
Proceed with manual ignition;
Check that there is gas in the cylinder.
If the device does not work, close the gas inlet
tap and contact your dealer.
Manual ignition of the grill
If the electronic ignition does not work, the
manual ignition is used as a substitute.
To generate the flame, fully press down the
control knob and turn it from position grill
(Fig. 3).
Simultaneously ignite the burner with a match
or gas lighter.
Once the flame has been generated, press the
knob down for a few seconds so that the flame
remains lit.
CAUTION: If the burner does not turn on:
Check that there is gas in the cylinder.
If the device does not work, close the gas inlet
tap and contact your dealer.

Table of Contents

Related product manuals