Swiss Bionic Solutions IMRS - Page 8

Page 8 / Operator‘s Guide / iMRS
© Swiss Bionic Soluons Schweiz GmbH / 8834 Schindellegi / 2016
Guidelines and manufacturer‘s declaraon - electromagnec immunity
The iMRS is intended for operaon in an ELECTROMAGNETIC ENVIRONMENT as given below.
The customer or user of the iMRS should ensure that it is operated in such an environment.
Interference
Immunity Tests
IEC 60601
Test Level
Com-
pliance
Level
Electromagnec Environment - Guidelines
Conducted RF
interference
acc. to IEC
61000-4-6
Radiated RF
interference
acc. to IEC
61000-4-3
3 V eecve
value
150 kHz to
80 MHz
3 V/m
80 MHz to
2.5 GHz
3V Portable and mobile radio devices should not
be used at a distance from the iMRS, including
the cables, less than the recommended safe
distance calculated by the relevant equaon
for the transmied frequency.
Recommended safe distance:
for 80 MHz to 800 MHz
for 800 MHz to 2.5 GHz
with „P“ as the rated power of the transmier
in was (W) according to the informaon from
the transmier manufacturer and „d“ as the
recommended safe distance in metres (m). The
eld strength of staonary radio transmiers
should be invesgated locally for all frequen-
cies
a
lower than the compliance level
b
Interference is possible in the vicinity of
devices carrying the following symbol.
NOTE 1 The higher frequency range applies in the cases of 80 MHz and 800 MHz.
NOTE 2 These guidelines may not apply in all cases. The propagaon of electromagnec
waves is aected by absorpon and reecon from buildings, objects and people.
d = 1,2√P
d = 1,2√P
d = 2,3
√P
3V/m