52 53
8.2 Power Pack Charging
To set up the Power Pack, you must first turn on the battery.
The battery is shipped turned off for safety.
Do this by pressing firmly on the (-) symbol at the back of
the Power Pack.
Alternatively, use the back of the blade cleaning tool to flick
the switch.
2
1
To charge the Power Pack, use the charge port in the rear
of the pack.
3
Battery level
Press & hold to
turn on front light
Press & hold
to turn on
powerpack
Press & hold for
walk mode
Charge port & battery on/off
switch is under the charge cover
Power level
Light Fixture
To Next Page
Loading...
