14 15
5.1 Motor Wheel
Remove your old tyre + front wheel from your bicycle
- Swap the inner tube and tyre from the old wheel to
your new Swytch motor wheel.
- If your tyre tread is directional, make sure to face it the
correct way. Pump the tyre to the manufacturer’s suggested
pressure.
Fit disc brake disc (optional)
If you have disc brakes, move the disc from your old wheel
to your new Swytch motor wheel.
1
2
Note: Screws should have an 8mm thread length. If they are
longer they may cause the motor to stop spinning. If they are
shorter, you may strip the thread of the motor wheel.
Installation
5
To Next Page
Loading...
