EN
28
Subindex 8d
Subindex 8d refers to the Input for rated frequency (P141). It describes from which source the frequency
inverter receives the setpoint.
NOTE: See also Operating Manual Operating Software SycoDrive for HF Inverters e@syDrive 4624, 4625, 4626.
Subindex 92
Subindex 92 refers to the Direction of rotation (P146).
The direction of rotation is determined by the current setting of the parameter / object "Direction of rotation"
(P146 / 0x3000:92) in connection with the setpoint value via CAN (0x6042 vl_target_velocity). A positive sign of
vl_target_velocity (0x6042) leads to the direction of rotation set via PC or digital inputs, a negative sign to the
corresponding opposite direction of rotation.
NOTE: See also Operating Manual Operating Software SycoDrive for HF Inverters e@syDrive 4624, 4625, 4626.
Subindex 95
Subindex 95 refers to the motor parameter sets saved in the inverter (M1…M16). Each bit represents a
memory location for a motor parameter set, where bit 0 (LSB) represents parameter set 1 (M1).
NOTE: See also Operating Manual Operating Software SycoDrive for HF Inverters e@syDrive 4624, 4625, 4626.