Sym CRUiSYM - Troubleshooting Engine Starting Problems; Engine No-Start Diagnostic Steps

11. When there is an abnormal condition or a trouble
26
DIAGNOSIS WHEN ENGINE DOES NOT START
(1). Has the ignition switch key been turned to
“ON” position?
(2). Is EFi trouble warning Indicator ” ” stay
illuminated? If the trouble indicator lights on,
please let a SYM dealer check the self-diagnosis
system by tools.
(3). Is there enough fuel in the fuel tank?
If the fuel is too few (almost empty), the
Low Fuel Indicator ” ” will light on,
(4). Is the rear or front wheel brakes applied when
pressing starting button?
(5). Check that the engine stop switch is in the
“ ”.RUN position or not?
(6). Turn the ignition switch key “ ”, and press
horn button down, if the horn does not sound,
the fuse may have been burned out.
【Have your scooter checked by SYM authorized dealer or franchised dealer immediately if there are no
problems with the above items and engine still can not be started.】
Turn signal light switch
Horn button
For Front Wheel
For Rear Wheel
EFi trouble warning indicator
?