EasyManua.ls Logo

Sym MMBCU - Brake and Fuel System Maintenance; Fuel Inspection and Refueling Precautions; Transmission Oil Change and Inspection; Brake System Inspection Guide

Sym MMBCU
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
Tire Inspection
Be sure to check and inflate the tire when engine is turned off.
Measure the tire pressure by tire pressure gauge and inflate to recommended tire pressure.
Front tire: 1.8 kgf/
Rear tire: 2.3 kgf/
Visually check if the tire is cracked or cut.
Visually check if small stone or nail is stuck in the thread.
Check the tire wear by the thread wear indicator.
Replace the tire if worn out.
Steering and Front Fork Inspection
Check while engine is turned off.
Visual check if the front forks are damaged or l leaking oil.
Compress the front forks by pushing down the
steering handle to check if the forks operate smoothly
without noise.
Check if the steering axle locknut is tightened properly.
Turn the handlebar at all directions to check if the
handlebar operates smoothly.
Check if the handlebar is pulled by the brake hose.
Have your scooter checked by an authorized
SYM dealer for your safety.
Foreign material
(stone, nail, etc.)
Cut or crack
Thread wear indicator

Related product manuals