Sym MMBCU - Cooling System and Air Cleaner Maintenance; Cooling System Inspection and Refilling; Air Cleaner Inspection and Replacement

28
12. Troubleshooting
Engine Does Not Start
1. Has the ignition switch key been turned to
“ON” position?
2. Is there enough fuel in the fuel tank or the
fuel gauge needle is at “E” position?
3.
Is the front or rear brake applied when pressing
starter button?
4. Do not pull throttle when pressing starter
button. Keep throttle full close.
5. Turn the ignition switch key to “ON”
position and press horn button, if the horn
does not sound, the fuse may have been
blown.
6. If the EFi warning indicator is on? Contact
your SYM authorized dealer for inspection.
7. The ignition switch is turned on, but the
engine cannot be started? Contact your SYM
authorized dealer for inspection.
EFi warning indicator
Turn light switch
Horn switch
Full
close
Full
open
Starter button
Idling Start & Stop switch