11
Main Switch Operation
Ⓐ Ignition Key Slot
The ignition key into the ignition key hole to operate the ignition switch.
Ⓑ “On” Position
Engine can be started in this position. Ignition key cannot be removed.
Ⓒ “Off” Position
Engine can be turned off in this position. Ignition key can be removed.
Ⓓ “Fuel Lid” Position
The fuel lid can be opened in this position. Turn the ignition key to “OFF ” position, push the
ignition key and turn clockwise to open the fuel lid.
Ⓔ “Lock” Position
The handlebar can be locked in this position. Turn the ignition key to “OFF ” position to stop the
engine. Turn the handlebar fully to the left. Push the ignition key anti-clockwise to lock the
handlebar. The ignition key can be removed in this position. To unlock the handlebar, turn the
ignition key clockwise to “OFF ” position.
Ⓕ “Seat Open” Position
The seat can be opened in these positions.
In“ON”position, turn the ignition key clockwise, the ignition key will return to“ON”position
automatically.
In“OFF”position, turn the ignition key anti-clockwise, the ignition key will return to “OFF”
position automatically.
In“Lock”position, turn the ignition key anti-clockwise, the ignition key will return to “Lock”
position automatically.
Ⓖ Magnetic Shutter
Push the “PUSH SHUT
” button to close the ignition key slot.
Ⓗ Shutter Opener
Align the projection ○aE A of the shutter key with the shutter slot, and turn the shutter key
clockwise to open.
CAUTION:
Remove protection film sticker on the main switch to avoid it stuck into the main switch and
cause malfunction.
Do not attach too many objects to the ignition key to prevent interfering the workability of the
Ⓖ
To Next Page
Loading...
Need help?
General
