5-2
P470/370 RF Scanner Product Reference Guide
The following table lists the defaults for all parameters. If you wish to change any option,
scan the appropriate bar code(s). An asterisk (*) next to a bar code indicates the default.
Table 5-1. Default Tabl e
Parameter Default Page Number
Set Default Parameter All Defaults 5-7
Communication Protocol
Scan & Transmit Application RS232/Synapse 5-8
RS-232 Host Type Standard 5-9
Host Response Timeout 5 seconds 5-12
RF Channel No Default Setting 5-13
RF Retries 4 5-13
Sleep Time 10 seconds 5-15
Decimal Separator Decimal Point (.) 5-16
Key Click Enabled 5-17
Beeper Options
Beeper Tone High Frequency 5-18
Beeper Volume High 5-19
Power Detect Beep Enabled 5-20
Beep After Good Decode Enabled 5-21
Laser On Time 3.0 seconds 5-22
Decode Options
Transmit “No Read” Message Disabled 5-23
Linear Code Type Security Levels 1 5-24
Bi-directional Redundancy Disabled 5-26
Autodiscriminate Response Time 1.0 second 5-27
To Next Page
