Symmons Unity S-6600 User Manual

Unity
™

-1.5 1.5 gpm (5.7 L/min) flow restrictor

-2.0 2.0 gpm (7.6 L/min) flow restrictor

-143 Euro-Flo three mode showerhead in place
of Clear-Flo

-145 Euro-Flo five mode showerhead in place of
Clear-Flo

-231 Super showerhead in place of Clear-Flo

-SS Slip spout on any tub/shower unit

-X Integral service stops

-CHKS Integral check stops

-IPS 1/2” female IPS connections

-REV Reverse coring for back to back
installations

-LP Loop handle

-OP 13” oval plate

-L/HD Less showerhead

-TRM Trim only, valve not included

-STN Satin Nickel finish
Model Numbers
Operation & Maintenance Manual
S-6600, S-6600TS, S-6601, S-6602
Specification
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Compliance
Certied by
CSA Group
Modifications
Note: Append appropriate -sufx to model number.
-ASME A112.18.1/CSA B125.1
-WaterSense 1.5 gpm (5.7 L/min)
2.0 gpm (7.6 L/min)

S-6600
Unity Shower Valve

S-6600TS
Unity Tub/Shower Valve

S-6601
Unity Shower System

S-6602
Unity Tub/Shower System
S-6600/S-6601
Shower system powered by the Temptrol
®
Pressure
Balancing valve. Features adjustable stop screw to
limit handle turn, integrated volume control, 1 mode
showerhead with easy to clean rubber nozzles and
standard 2.5 gpm (9.5 L/min) ow restrictor. Components
made from metal and nonmetallic materials plated in
standard polished chrome nish.
S-6600TS/S-6602
Tub/shower system powered by the Temptrol
®
Pressure
Balancing valve. Features adjustable stop screw to limit
handle turn, integrated diverter, non-diverter tub spout,
1 mode showerhead with easy to clean rubber nozzles
and standard 2.5 gpm (9.5 L/min) ow restrictor.
Components made from metal and nonmetallic materials
plated in standard polished chrome nish.
For California Residents
WARNING: This product contains chemicals known to
the State of California to cause cancer, birth defects, or
other reproductive harm.

Symmons Unity S-6600 Specifications

General

Brand	Symmons
Model	Unity S-6600
Category	Plumbing Product
Language	English

Summary

Product Specifications and Compliance

Model Numbers Identification

Lists the available Symmons Unity shower system model numbers.

Technical Specifications

Details product features, pressure balancing, and finish.

Product Compliance Standards

Outlines adherence to ASME, CSA, and WaterSense standards.

California Proposition 65 Warning

States chemicals known to cause cancer or reproductive harm in California.

Warranty Information

Covers limited lifetime and 5-year warranty terms for different installations.

Product Dimensions and Measurements

Parts Breakdown and Tools

Replacement Parts Identification

Lists and identifies all replaceable components with their part numbers.

Tools Required for Installation

Lists essential tools needed for the assembly and installation process.

Installation Procedure

Mounting Plate and Escutcheon Installation

Steps for attaching the mounting plate and shower escutcheon.

Handle and Control Installation

Instructions for installing the diverter, volume control, and main handles.

Tub Spout and Shower Arm Assembly

Guidance for fitting the tub spout and connecting the shower arm.

Showerhead Attachment

Procedure for connecting the showerhead to the shower arm.

Operation and Troubleshooting

Temperature Control Operation

How to adjust the shower handle for cold, warm, and hot water.

Diverter Control Operation

Instructions for switching between tub spout and showerhead.

Volume Control Operation

How to adjust the handle for high and low water flow.

Troubleshooting Finish Spotting

Solution for water spotting on the fixture finish.