Synesso MVP Hydra Basic Operation

2.2
 Up to 6 programs can be made available on each group
 Program #1 cannot be deactivated
 Deactivated programs retain any settings stored, but are not available for further saving or brewing
replay until reactivated. The program location is also skipped (on the timer) when cycling through
programs with the right press
2.4
 This screen only appears on machines with a line boost system installed
 [AUTO] runs the boost motor when any water valves are open
 [ON] runs the boost motor until a 5 minute time-out
 [OFF] stops the boost motor from running at all

Synesso MVP Hydra Specifications

General

Pump Type	Rotary
PID Temperature Control	Yes
Pre-infusion	Yes
Volumetric Dosing	Yes
Boiler Material	Stainless Steel
Pressure Profiling	Yes
Material	Stainless Steel
Water Reservoir	Direct plumb only