8
Proper water ltraon and regular lter changes are a requirement to keep your factory warranty valid
and your machine funconing properly. It is highly recommended that you contact a professional water
ltraon specialist in your area and have your water tested to determine the proper ltraon system. It is
important to note that many municipalies change their water sources throughout the year, so addional
water tests may become necessary.
Water Standards to keep your warranty valid:
In Synesso’s experience, Everpure Claris and Cirqua formulator systems can damage the
Synesso stainless steel tanks. Use of either system is highly discouraged and will void the
water related parts of the machine warranty.
Any part which is determined to be defecve in materials or workmanship should be returned to Synesso or
to an authorized service locaon, shipping costs prepaid, as Synesso designates. Synesso may repair or re-
place the product or part with new or factory refurbished equipment at Synesso’s sole discreon. If the
product or part is determined to be defecve and in compliance with the Limited Warranty condions, the
replacement part or product will be returned to the purchaser with shipping prepaid **.
Many jurisdicons have codes and regulaons governing sales, construcon, installaon, and/or use of
products for certain purposes, which may vary from area to area. While Synesso aempts to assure that its
products comply with such codes, it cannot guarantee compliance and cannot be responsible for how the
product is used or installed.
Synesso’s liability is limited to the purchase price of the product and shall not be held liable for damages
that extend beyond the product itself. Synesso’s liability of consequenal, incidental damages, indirect or
direct damages for personal injury, inability to properly use this product, loss of business prots or interrup-
on to business is expressly disclaimed.
** Regarding equipment sold or residing outside the United States: purchaser may be required to pay for
the shipping and associated costs for warranty parts, repairs and services. Please contact your local distribu-
tor to resolve the issue regionally, if possible.
WARRANTY & WATER STANDARDS
Total Dissolved Solids (TDS) 30 to 200 ppm (parts per million)
Total Hardness - in ppm 50 to 85 ppm
Total Hardness – in grains 3 to 5 grains (divide ppm by 17.1 to get grains)
pH 6.5 pH to 8 pH
Chloride 5-15 ppm – any Chlorides can be corrosive and harmful
Total Alkalinity Less than 100 ppm
Chlorine 0 ppm
Iron 0 ppm
To Next Page
Loading...
Need help?
General
