Synology DVA1622 - Synology DVA1622 at a Glance

4
Chapter 1: Before You Start
Synology DVA1622 at a Glance
No. Article Name Location Description
1
Drive Tray
Front
Install drives (hard disk drives or solid state drives) here.
2
Drive Tray Lock Lock or unlock drive trays.
3
STATUS Indicator
Displays the status of the system. For more information, see
"System Modes and LED Indicators".
4
DRIVE Status
Indicator
Displays the status of each drive. For more information, see "Other
LED Indicators".
5
USB 3.2 Gen 1 Port
Connect external drives or other USB devices to the Network
Video Recorder here.
6
Power Button
1. Press to power on your Network Video Recorder.
2. To power o󰀨 your Network Video Recorder, press and hold until
you hear a beep sound and the Power LED starts blinking.
7
Fan
Back
Disposes of excess heat and cools the system. If the fan
malfunctions, the Network Video Recorder will emit a beeping
sound.
8
1GbE RJ-45 Port Connect RJ-45 network cable here.
9
Reset Button
1. Mode 1: Press and hold until you hear a beep sound to restore
the IP address, DNS server, and password for the admin
account to default.
2. Mode 2: Press and hold until you hear a beep, release the
button immediately, then press and hold again until you hear
three beeps to return the Network Video Recorder to "Not
Installed" status so that DiskStation Manager (DSM) can be
reinstalled.
For detailed information on how to reset your Network Video
Recorder, please refer to
this article
.
10
HDMI Output Connect HDMI cable here.
11
Power Port Connect power cord here.
12
Kensington
Security Slot
Attach a Kensington security lock here.
13
USB 3.2 Gen 1 Port
Connect external drives or other USB devices to the Network
Video Recorder here.