Synology DVA1622 - Other LED Indicators

7
Chapter 1: Before You Start
Other LED Indicators
LED Indicator Color Status Description
DRIVE status
Green
Static Drive ready and idle
Blinking Accessing drive
Orange
1
Static
Locating drive
Drive deactivated by user
Port disabled
2
Removing this drive will cause system
damage; this is the only drive with
DSM installed
O󰀨 No internal Drive
Rear 1GbE LAN
(on lower side of jack)
Green
Static
1 Gbps connected
Orange 100 Mbps connected
O󰀨 10 Mbps connected/No network
Rear 1GbE LAN
(on upper side of jack)
Green
Static Network connected
Blinking Network active
O󰀨 No network
Note:
1
When the drive LED indicator is red/orange, we recommend you sign in to DSM and go to
Storage
Manager
>
HDD/SSD
for more information.
2
Please try to restart your Network Video Recorder or re-insert the drives, then run the HDD/SSD
manufacturer's diagnostic tool to check the health status of the drives. If you can sign in to DSM, please
run the built-in S.M.A.R.T. test to scan the drives. If the problem remains unresolved, please contact
Synology Technical Support for help.