12 Synopsys, Inc.
SolvNetPlus
DesignWare
5.60a
March 2020
Setting Up Hardware Components PCIe IP Prototyping Kit Installation Guide
Figure 1-6 PCIe Root Complex IP Prototyping Kit Components with E32 PHY on HAPS-80
Table 1-2 provides a description of the recommended items and part numbers used in the hardware setup.
There are specific components for the PCIe Gen3 and Gen4 setups, see “Hardware Setup” on page 16 for the
set up instructions.
Table 1-2 PCIe IP Prototyping Kit Recommended Components and Part Numbers
Quantity Part Number Item Description
DesignWare PCIe Gen4 Root Complex Controller on HAPS-80, E16 PHY, AXI tunnel to ARC SDP (E826-0)
1 HW0352-000 HAPS-80 S26 (-2) High-Performance ASIC Prototyping System HAPS-80
1 DWC_PHY_E16_P
CIe_Gen4
PHY Board Synopsys E16 PHY Board (PCIe Gen4 PHY)
1 8KH2-0723-0250
a 3M
TM
PCIe x8
Extender
Twin Axial Cable Assembly or PCIe x8 extender card
applications
1 HW0071-0 ARC AXS101 SDP DesignWare ARC AXS 101 Software Development Platform
2 HW0039-0 CON_CABLE_25_HT3 HT3 Cables
1 N/A PCIe Backplane Rev. C PCIe Root Complex - Endpoint Backplane
2
3052113 TS2GSDC TRANSCEND TS2GSDC CARD
To Next Page
Loading...
