Synopsys DesignWare 826-0 - Page 17

Synopsys, Inc. 17
SolvNetPlus
DesignWare
5.60a
March 2020
PCIe IP Prototyping Kit Installation Guide Setting Up Hardware Components
3. Remove the locker pin, and the four screws holding the MGB shelves, see Figure 1-8.
Figure 1-8 Detail of the HAPS-80 MGB Shelves
4. Remove the MGB Shelves from the HAPS-80 and insert the RISER1_MGB card in the MGB Shelves,
as shown in Figure 1-9.
Figure 1-9 Detail of the RISER1_MGB and HAPS-80