index
105
SYNRAD OEM v40 Operator’s Manual Version 4
Control signals 3-5–3-7
Command signal, 3-6–3-7
Pulse width modulation (PWM), 3-5–3-6
Tickle pulse, 3-5
Coolants 1-9
Coolant temperature 1-9, 1-10, 1-11, 2-8,
2-10, 4-13, 4-15
Cooling connections 1-11, 2-3, 2-5
Cooling fans
clearance, 1-6, 1-12, 1-13, 4-15
recommended location, 1-12, 1-13
Cooling ports 1-11, 2-3, 2-5
Cooling tubing 1-4, 1-5
connecting, 1-11
guidelines, 1-8
Cooling water
draining, 1-3, 4-3
ow rate, 1-9, 1-11, 2-8, 2-10, 4-15
temperature setpoint, 1-9–1-10, 2-8, 2-10,
4-15
Copyright information x
Customer Service xii
Customer-supplied interlock 3-19
D
Daily inspections 4-2–4-3
Danger
denition, 1
explosive atmospheres, 2
eye protection, 1
laser radiation, 1, 2-7, 2-10, 4-3, 4-6, 4-17
DB-15 connections. See User I/O connections
DB-9 connections 3-22–3-23
+24 VDC Fan Power, 1-12, 3-22, 3-23
+5 VDC Auxiliary Power, 3-23
DC Power Ground, 3-22
pinout diagram, 3-22
Shutter switch input, 3-23
descriptions, 3-22–3-23
DB-9 connector 2-6, 3-12, 3-22–3-23
DC-5 DC power supply 1-14–1-15
AC input requirements, 1-14
connecting, 1-14–1-15
DC power
+24 VDC, 3-10, 3-13, 3-19, 3-20
+5 VDC, 3-10, 3-13, 3-19, 4-14, 4-15
Aux. DC Power Ground, 3-11, 3-13, 4-14,
4-15
DC Power cable 1-15, 2-3, 2-5
connecting, 1-15
DC Power Ground 3-22, 3-23
Delivery optics 3-3–3-4
Dew point 1-9, 1-10, 1-11
cautions, 1-11, 2-8, 2-9, 2-10, 2-12
chart, 1-10
Diode Pointer
aperture dust cover, 2-8, 2-11
power connector, 2-2, 2-4
Disabling Firestar 4-2
E
Electrical connections 1-14–1-15
EU requirements 7
safety features, 8
European headquarters xii
Expander/collimator 3-3
External control 3-7
Eye protection 1, 2-8, 2-10
F
Fan clearance 1-6, 1-12, 1-13, 4-15
Faults 4-11–4-16
codes, 4-11
keyswitch, 4-11–4-12
OEM, 4-12–4-13
over-temperature, 4-10, 4-11, 4-13, 4-14,
4-15, 4-16
Over Voltage fault, 4-11, 4-12, 4-13
PWM Drive fault, 4-12, 4-13
remote interlock, 4-10, 4-11, 4-12, 4-14,
4-16
resetting, 4-11–4-13
RF Drive DC fault, 4-12, 4-13
shutter, 4-10, 4-12, 4-13, 4-15
Under Voltage fault, 4-12, 4-13
Fault codes 4-11
FCC 6
caution to the user, 6
information to the user, 6
Final Test report 1-4, 1-5
Firestar
daily inspections, 4-2–4-3
disabling, 4-2
faults, 4-11–4-16
features, 1-2
To Next Page
Loading...
