Synrad Firestar v40 - Page 107

index
107
SYNRAD OEM v40 Operator’s Manual Version 4
Laser Active output 3-10, 3-17, 4-9, 4-10
description, 3-10
Laser aperture 2-2, 2-4
Laser faults 4-11, 4-14–4-16
Laser Institute of America 3
Laser Ready output 3-11, 3-17, 3-24, 3-25,
4-9, 4-10
description, 3-11, 3-17
Laser Safety Handbook 3
Laser safety information 1–8
Laser tube 3-2
Lens cleaning 4-3–4-5
M
Maintenance 4-2–4-5
cleaning optical components, 4-3–4-5
daily inspections, 4-2–4-3
disabling Firestar, 4-2
storage/shipping, 4-3
Marking/engraving operation 3-9
Material Safety Data Sheets (MSDS) 2, 4-4
Model numbers 1-2
Modulation 3-5–3-6
Mounting 1-6–1-7
from above, 1-6–1-7
from below, 1-7
Mounting bolts 1-4, 1-5, 1-7
Multiple PLC driven inputs 3-20
O
Occupational Safety and Health Administration
Online Technical Manual, 3
OEM faults
resetting, 4-12–4-13
Operating modes 3-7–3-9
analog current control, 3-7–3-8
analog voltage control, 3-7–3-8
continuous wave, 3-8
external control, 3-7
gated operation, 3-8
marking/engraving operation, 3-9
Operational owchart 4-7
Operator’s manual 1-4, 1-5
Optical accessories mounting 2-2, 2-4
Optical components
cleaning, 4-3–4-5
cleaning materials, 4-4
guidelines, 4-4
Optical output pulse
waveforms, 3-6
Optical resonator 3-2
Optical setup
delivery optics, 3-3–3-4
focusing optics, 3-4
troubleshooting, 4-17
Other laser faults 4-14–4-16
Outline and Mounting drawings 3-28–3-30
Output circuit
equivalent schematic, 3-18
pin descriptions, 3-17
sample diagrams, 3-20–3-21
specications, 3-18
Output Common 3-11, 3-17, 3-21, 3-24, 3-25
description, 3-17
Output signals 3-17–3-18
driving PLC input module, 3-21
driving relay, 3-21
driving warning lamp, 3-20
Interlock Open, 3-11, 3-17, 3-25, 4-9, 4-10
Laser Active, 3-10, 3-17, 4-9, 4-10
Laser Ready, 3-11, 3-17, 3-24, 3-25, 4-9,
4-10
Output Common, 3-11, 3-17, 3-21, 3-24,
3-25
Over Temperature, 3-10, 3-17, 4-9, 4-10,
4-16
Shutter Open, 3-11, 3-17, 3-25, 4-9, 4-10
Over Temperature fault 4-11–4-12, 4-13
Over-temperature indicator. See Temp (TMP)
indicator
Over Temperature output 3-10, 3-17, 4-9,
4-10, 4-14, 4-15, 4-16
description, 3-10, 3-17
Over-temperature protection 8
Over Voltage fault 4-11, 4-12, 4-13
P
Package outline drawings 3-28–3-30
Packaging
guidelines, 1-3
Packaging drawing 3-31
Packaging instructions 1-3