Syscall Nttworks SB-700 - Delay Time;Alarm Time;Clear Bell Sound Setting

7-3. Delay Time/ Alarm Time/ Clear Bell Sound Setting
· Delay Time Setting: To prevent from receiving a duplicated signal when using it with a repeater.
· Alarm Time Setting: Set the alarm time when getting the signal.
· Clear Bell Sound Setting: Clear bell alarm ON/OFF
4.Shift the Menu
Delay Time
Setting
5.Select Display Setting
Tap ‘ ’: Change the last digit number
Touch and hold ‘ ’: Change the number in tens
6.Select the Sub-setup Menu
*Range: 0~60sec
*Default: 0sec
*Range: 0~60sec
(Available: 1,3,5,7,10,20,30,40,50,60sec and 00(infinity))
*Default: 1sec
: Select the menu
10
ALARM
Delay Time
10
ALARM
Delay Time
0
10
ALARM
Alarm Time
Setting
‘ ’ button: Set the number
Alarm Setting
01
ALARM
Clear Bell Sound
Setting
‘ ’ button: Turn on/off the Clr-bell sound
Clr-bell Sound
Clr
Tap ‘ ’ button once
Tap ‘ ’ button twice
Touch and hold ‘ ’ button
for 1sec
1. Password Field 2.Enter Password 0000 3.Go to Settings
Tap ‘ ’ button 3 times
0
0 0 0 0
Tap ‘ ’ button once
0 0 0 0
-15-