SystemAir Geniox 10

3060386 | Geniox Air Handling Unit - User Manual
Note: Never place the strap on the vertical prole too close to a corner, because the plastic corners and the proles are not reinforced
for the heavy load and stress created by the tensioner when a section is pulled along the base frame or on the oor.
Placethestraponthebottomprolesoftheunittoavoidany
loadandstressontheverticalproleswhensectionsarepulled
together along the base frame. The sections must be pulled
togetherwiththestrapplacedonthebottomproles.Donot
pull and slide a section unless the strap is placed on the bottom
prole.
When the sections are pulled together, it may be helpful to place
the strap halfway up on the unit in order to press the sections
together to achieve a seal between the sections. Only gentle
tensionisallowedbecausetheverticalprolesarenotreinforced
for stress in this direction and may bend.
Instruction for unloading on the site as well as installation and connection | 15