20 (36), 0-004-7506-4 (EN) TAC AB, 2001-08-08
TAC Xenta OP Handbook 3 Dialogs with TAC Xenta 100
Wait for the display
Xenta 100 is:
Configured
Press <DOWN> to
continue
Press the key and wait for a display looking like:
Xenta 103v1.00-10
103/A/v10003
units as SI [^]
NV index? 000
The first two lines, showing software versions, are displayed the first
time only.
The third line shows which unit system is used, when SNVT values
are presented in the OP menus.
The
key toggles between SI (metric) and US Imperial
(Inch-Pound) units.
From this display (normally only lines 3-4 appear) the different
Network Variables can be selected.
To Next Page
Loading...